SILGLO® Agglomerated Flux for Submerge Arc Welding

Description: SILGLO SJ501M 25kg/bag

Specifications: EN 760, AWS A5.17/5.23

Classifications: SA AR 1 88 AC H5 F48A0-EL8, F48A0-EM12K, F55AZ-EA2-A3

Characteristics: SILGLO® SJ501M is an agglomerated aluminate-rutile type flux.

Metallurgical behaviour: High silicon and manganese pick-up is obtained.

Grain size: 14 to 60 mesh

Basicit: 0.5 (BIIW)

It has excellent welding technology properties. Regularly shaped welds are deposited without reduction of area or interface notches.

Slag detachability is very good, especially at high speed.

Welding porosity scarcely occur.

Its welding speed can travel up to 120cm/minute.

The flux has low moisture pick-up and granular stability. Flux shall be capable of meeting the applied requirements. As the bulk density is low, so is the consumption rate.

Damp flux should be redried at 300-350 degrees Celsius for 2 hours.

SILVER BRAZING FLUXES are available in different forms

White silver brazing flux: (Ultra flux from Wolverine)

AWS A5.8: AWSFB3-A

Fed. Spec O-F-499 Type B

SAE Aeronautic Materials Spec: AMS 3410

Fully molten at 1100F (593C) effective to 1600F (871C)

Packing size: 500gm/jar or 65lbs per pail

SILGLO® Black Flux

AWS A5.8: AWS FB3C

Fed. Spec O-F-499 Type B

SAE Aeronautic Materials Spec: AMS 3410

Effective for brazing for temperatures up to 1800F(982C)

Packing size: 500gm/jar or 65lbs per pail

SILGLO® Dry Flux

For silver bazing allows user to consumers to customize the flux’s solvent and viscosity characteristics.

Packing size: 250gm/jar

SILGLO® Bronze Brazing Powder flux

Allows user to consumers to customize the flux’s solvent and viscosity characteristics.

Packing size: 250gm/jar

SILGLO® G-Vapour Gas Flux

Consists of specially blended evaporative liquid flux that vapourises in a special tank (Flux vapourizer). The Vapourized flux is carried by the fuel gas (eg. Acetylene, LPG, LNG, etc) through the welding torch to the flame.

Is a revolutionary flux which obviates the need to separately apply powder or paste type fluxes during welding or brazing applications. The flux in the flame removes oxides and is completely burnt off leaving no slag inclusions in fillet joints. Brazing with G-Vapour Gas Flux results in clean and bright finishes that will not corrode or discolour for a long time.

We recommend using together with our Vapour tanks, Gas savers and torches.

Packing size: 20 Litre/Pail or 200 Litre/drum